MDP14000000FD04 Ver la hoja de datos (PDF) - Vishay Semiconductors
Número de pieza
componentes Descripción
Fabricante
MDP14000000FD04 Datasheet PDF : 5 Pages
| |||
www.vishay.com
MDP 01, 03, 05
Vishay Dale
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
FEATURES
• Isolated, bussed, and dual terminator schematics
available
• 0.160" (4.06 mm) maximum seated height and Available
rugged, molded case construction
• Thick film resistive elements
• Low temperature coefficient (-55 °C to +125 °C)
± 100 ppm/°C
• Reduces total assembly costs
Available
• Compatible with automatic inserting equipment
• Wide resistance range (10 to 2.2 M)
• Uniform performance characteristics
• Available in tube pack
• Material categorization: For definitions of compliance please
see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
NO. OF
PINS
MDP 14
MDP 16
SCHEMATIC
01
03
05
01
03
05
POWER RATING
ELEMENT (1)
P70 °C
W
0.125
0.250
0.125
0.125
0.250
0.125
RESISTANCE
RANGE
10 to 2.2M
10 to 2.2M
Consult factory
10 to 2.2M
10 to 2.2M
Consult factory
Notes
(1) For resistor power ratings at +25 °C see derating curves
(2) Tighter tracking available
(3) ± 2 % standard, ± 1 %, and ± 5 % available
TOLERANCE (3)
±%
1, 2, 5
1, 2, 5
TEMPERATURE
COEFFICIENT
(-55 °C to +125 °C)
± ppm/°C
100
100
TCR
TRACKING (2)
(-55 °C to +125 °C)
± ppm/°C
50
50
100
50
50
100
WEIGHT
g
1.3
1.5
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MDP1403100RGD04 (preferred part numbering format)
MDP 1 4 0 3 1 0 0 RGD 0 4
GLOBAL
MODEL
PIN COUNT SCHEMATIC
RESISTANCE
VALUE
TOLERANCE
CODE
MDP
14 = 14 pin
16 = 16 pin
01 = Bussed
03 = Isolated
00 = Special
R=
K = k
M = M
10R0 = 10
680K = 680 k
1M00 = 1.0 M
0000 = 0 Jumper
F=±1%
G=±2%
J=±5%
S = Special
Z = 0 Jumper
Historical Part Number Example: MDP1403101G (will continue to be accepted)
MDP
14
03
101
PACKAGING
E04 = Lead (Pb)-free, tube
D04 = Tin/lead, tube
SPECIAL
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
G
D04
HISTORICAL MODEL
PIN COUNT
SCHEMATIC
RESISTANCE VALUE TOLERANCE CODE
New Global Part Numbering: MDP1405121CGD04 (preferred part numbering format)
MDP 1 4 0 5 1 2 1 CGD 0 4
PACKAGING
GLOBAL
MODEL
MDP
PIN COUNT
14 = 14 pin
16 = 16 pin
SCHEMATIC
05 = Dual
terminator
RESISTANCE
VALUE
3 digit impedance code,
followed by alpha
modifier (see Impedance
Codes table)
TOLERANCE
CODE
F=±1%
G=±2%
J=±5%
PACKAGING
E04 = Lead (Pb)-free, tube
D04 = Tin/lead, tube
Historical Part Number Example: MDP1405221271G (will continue to be accepted)
MDP
14
05
221
271
G
SPECIAL
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
D04
HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING
Note
• For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542).
Revision: 12-Sep-13
1
Document Number: 31511
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 