HFBR-1446 Ver la hoja de datos (PDF) - HP => Agilent Technologies

Número de pieza

componentes Descripción

Fabricante

HFBR-1446

Low Cost, Miniature Fiber Optic Components with ST®, SMA, SC and FC Ports

HP => Agilent Technologies 

HFBR-0400 Series

Evaluation Kits

HFBR-0410 ST Evaluation Kit

Contains the following :

• One HFBR-1412 transmitter

• One HFBR-2412 five megabaud

TTL receiver

• Three meters of ST connec-

tored 62.5/125 (µm fiber optic

cable with low cost plastic

ferrules.

• Related literature

HFBR-0414 ST Evaluation Kit

Includes additional components

to interface to the transmitter and

receiver as well as the PCB to

reduce design time.

Contains the following:

• One HFBR-1414T transmitter

• One HFBR-2416T receiver

• Three meters of ST connec-

tored 62.5/125 µm fiber optic

cable

• Printed circuit board

• ML-4622 CP Data Quantizer

• 74ACTllOOON LED Driver

• LT1016CN8 Comparator

• 4.7 µH Inductor

• Related literature

HFBR-0400 SMA Evaluation

Kit

Contains the following :

• One HFBR-1402 transmitter

• One HFBR-2402 five megabaud

TTL receiver

• Two meters of SMA

connectored 1000 µm plastic

optical fiber

• Related literature

HFBR-0416 Evaluation Kit

Contains the following:

• One fully assembled 1x9

transceiver board for 155 MBd

evaluation including:

-HFBR-1414 transmitter

-HFBR-2416 receiver

-circuitry

• Related literature

HFBR-0463 Ethernet MAU

Evaluation Kit

Contains the following:

• One fully assembled Media

Attachment Unit (MAU) board

which includes:

-HFBR-1414 transmitter

-HFBR-2416 receiver

-HFBR-4663 IC

• Related literature

Note: Cable not included. Order

HFBR-BXS010 seperately (2

pieces)

Package and Handling

Information

Package Information

All HFBR-0400 Series

transmitters and receivers are

housed in a low-cost, dual-inline

package that is made of high

strength, heat resistant, chem-

ically resistant, and UL 94V-O

flame retardant ULTEM® (plastic

(UL File #E121562). The

transmitters are easily identified

by the light grey color connector

port. The receivers are easily

identified by the dark grey color

connector port. (Black color for

conductive port.) The package is

designed for auto-insertion and

wave soldering so it is ideal for

high volume production

applications.

Handling and Design

Information

Each part comes with a protective

port cap or plug covering the

optics. These caps/plugs will vary

by port style. When soldering, it

is advisable to leave the protec-

tive cap on the unit to keep the

optics clean. Good system

performance requires clean port

optics and cable ferrules to avoid

obstructing the optical path.

Clean compressed air often is

sufficient to remove particles of

dirt; methanol on a cotton swab

also works well.

Recommended Chemicals for

Cleaning/Degreasing

HFBR-0400 Products

Alcohols: methyl, isopropyl,

isobutyl. Aliphatics: hexane,

heptane, Other: soap solution,

naphtha.

Do not use partially halogenated

hydrocarbons such as 1,1.1

trichloroethane, ketones such as

MEK, acetone, chloroform, ethyl

acetate, methylene dichloride,

phenol, methylene chloride, or

N-methylpyrolldone. Also, HP

does not recommend the use of

cleaners that use halogenated

hydrocarbons because of their

potential environmental harm.

Ultem® is a registered Trademark of the GE corporation.

48

Share Link: