AH101J Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Fabricante
AH101J Datasheet PDF : 18 Pages
| |||
SAFETY STANDARDS REGULATED, REINFORCED
INSULATION TYPE, AH SERIES
POE-D10-00-E-13
Ver: 13
Page: 2 / 18
Date
Version Description
Record of change
page
2008.6.3 1
2008.8.22 2
2008.12.12 3
2009.7.8 4
2009.9.14 5
2009.12.24 6
2011.1.11 7
2011.5.12 8
2012.1.30 9
2012/4/6 10
2013/5/13 11
2013/10/16 12
1.D22-00-E-01( before) → POE-D10-00-E-01(1st edition)
1 Complete lead code
21
2. Add last SAP code “ H” for halogen and Pb free , epoxy resin..
3
1. Complete the 13th to 17th codes of SAP P/N.
4-5
2. Page layout adjustment.
1 Change PSA & POE logo to Walsin & POE logo.
2.Complete Marking statement.
10
3.Revised standard NO. of SEV, SEMKO, FIMKO, NEMKO, DEMKO and 12
KEMA.
Revised recognized NO. of FIMKO, NEMKO, DEMKO and KEMA.
1. H0: 18.0+2.0/-1.5 revised to 18.0+2.0/-0
2. “Protrusion length”: “+0.5to-1.0” revised to “2.0max (Or the end of lead
wire may be inside the tape.)”
3. Add “250V~” under the “UL” mark according to the product’s marking.
1. Marking
2. Correct X1 of recognized No by KTL.
3. Revised the Figure of impulse voltage test(Item 7.3.14) according to the
standard IEC 60384-14 ed.3
4. Add “1AH” code for Y1:400V marking type.
1. Review SAP P/N about diameter code:
YU*AH561K100* YU*AH561K080*
2. Delete “AT” taping type.
3. Add test item “Temperature Cycle ” .
4. Add item 10 “Drawing of internal structure and material list”
1. Review the safety standards approval and recognized no.
2. Delete “old P/N”
3. Add the special marking for P/N:YP*AH102K100
9
9
10
10
11
14
4
6
4,5,8,9
14
19
10
5~6
9
1. Review the approval rated voltage of UL and the marking.
8~9
In order to improve the traceability of the product, change the date code on 8
capacitor body, new date code can trace back to production “Lot No.”
1. Review the Lead diameter φ from 0.60 +0.1/-0.05mm to 0.55+/-0.05mm 5,6,7
2. Add“3.1Norminal parts&3.2 special for surge parts” for “3. Part
6
numbering/T.C/Capacitance/ Tolerance/Diameter”
3. In order the customer to know the round time of manufacture, change the 8
date code on capacitor body, new date code can know the month of
manufacture.
4. Delete “No marked with “ _” stand for Pb free”.
8
5. Delete “When the TCC is Y5V(YV), there is a “F” between the “AH” and 8
capacitance code.”
6. Review the Solderability time from 2 ±0.5s to 5±0.5s
11
1. Review the “Manufactured Date” to “Products ID” on the marking page
8
2. Delete “The marking can be printed on either one side or two side of
coating body.”and add “for SAP part number 10-11 digits ≤‘07’ 8
products”to two sides and “for SAP part number 11-12 digits ≥‘08 ’
products”to one side.
Share Link: 