S29AL016D70TAI011 Ver la hoja de datos (PDF) - Spansion Inc.
Número de pieza
componentes Descripción
Fabricante
S29AL016D70TAI011
Spansion Inc.
S29AL016D70TAI011 Datasheet PDF : 55 Pages
| |||
S29AL016D
16 Megabit (2 M x 8-Bit/1 M x 16-Bit)
CMOS 3.0 Volt-only Boot Sector Flash Memory
Data Sheet
This product has been retired and is not recommended for designs. For new and current designs, S29AL016J supercedes
S29AL016D. This is the factory-recommended migration path. Please refer to the S29AL016J data sheet for specifications and
ordering information.
Distinctive Characteristics
Architectural Advantages
Single Power Supply Operation
– Full voltage range: 2.7 to 3.6 volt read and write operations for
battery-powered applications
Manufactured on 200 nm Process Technology
– Fully compatible with 200 nm Am29LV160D and MBM29LV160E
devices
Flexible Sector Architecture
– One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64 Kbyte
sectors (byte mode)
– One 8 Kword, two 4 Kword, one 16 Kword, and thirty-one 32 Kword
sectors (word mode)
Sector Protection Features
– A hardware method of locking a sector to prevent any program or
erase operations within that sector
– Sectors can be locked in-system or via programming equipment
– Temporary Sector Unprotect feature allows code changes in
previously locked sectors
Unlock Bypass Program Command
– Reduces overall programming time when issuing multiple program
command sequences
Top or Bottom Boot Block Configurations Available
Compatibility with JEDEC standards
– Pinout and software compatible with single-power supply Flash
– Superior inadvertent write protection
Performance Characteristics
High Performance
– Access times as fast as 70 ns
– Extended temperature range (-40°C to +125°C)
Ultra Low Power Consumption (typical values at 5 MHz)
– 200 nA Automatic Sleep mode current
– 200 nA standby mode current
– 9 mA read current
– 20 mA program/erase current
Cycling Endurance: 1,000,000 cycles per sector typical
Data Retention: 20 years typical
Package Options
48-ball FBGA
48-pin TSOP
44-pin SOP
Software Features
CFI (Common Flash Interface) Compliant
– Provides device-specific information to the system, allowing host
software to easily reconfigure for different Flash devices
Erase Suspend/Erase Resume
– Suspends an erase operation to read data from, or program data to,
a sector that is not being erased, then resumes the erase operation
Data# Polling and Toggle Bits
– Provides a software method of detecting program or erase operation
completion
Hardware Features
Ready/Busy# Pin (RY/BY#)
– Provides a hardware method of detecting program or erase cycle
completion
Hardware Reset Pin (RESET#)
– Hardware method to reset the device to reading array data
Publication Number S29AL016D_00
Revision A Amendment 8
Issue Date February 27, 2009
Share Link: