ATTINY11 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

ATTINY11

AVR Studio® Compatible

Unspecified 

Hardware Description

3.6

Description of

NB! Not valid: AT45D021 2-Mbit DataFlash is included on the STK500 for data storage.

DataFlash Pins A DataFlash is a high-density Flash memory with SPI serial interface. A detailed

datasheet of the DataFlash can be obtained from the Flash memory section of the Atmel

CD-ROM or from the Atmel web site.

The DataFlash can be connected to the I/O pins of the microcontroller sockets. The

4-pin header marked “DATAFLASH” can be used for connecting the SPI interface of the

DataFlash to the I/O pins on the target AVR microcontroller in the socket. 2-wire cables

are included with STK500 for connecting the DataFlash to the I/O pins. The supplied

10-wire cables can also be used if the DataFlash is connected to the hardware SPI inter-

face on PORTB of the AVR microcontroller. The connection of the I/O pins is shown in

Figure 3-13. The block schematic of the DataFlash connection is shown in Figure 3-14,

for connection of the DataFlash to the AVR hardware SPI interface. The SPI interface

pinout is shown in Figure 3-11 and Figure 3-12.

Figure 3-11. PORTB SPI Pinout (40-pin Parts)

12

PB0

PB1

PB2

PB3

(SS)PB4

PB5(MOSI)

(MISO)PB6

PB7(SCK)

GND

VTG

Figure 3-12. PORTB SPI Pinout (28-pin Analog Parts)

12

PB0

PB1

(SS)PB2

PB3(MOSI)

(MISO)PB4

PB5(SCK)

PB6

PB7

GND

VTG

3-6

1925C–AVR–3/03

AVR STK500 User Guide

Share Link: