BA7654F(2008) Ver la hoja de datos (PDF) - ROHM Semiconductor
Número de pieza
componentes Descripción
Fabricante
BA7654F Datasheet PDF : 10 Pages
| |||
10. The BA7653AF/53AFV/52AF is a 3-input, 1-output switch. If it is used as a 2-input, 1-output switch, by leaving one input
Open and unused, the Open input pin will oscillate. However, this does not affect other pins and is not particularly a
problem for operation. If necessary, connect the input pin to GND via a capacitor or connect the input pin directly to VCC
to stop oscillation.
11. CTL pin is in indeterminate status when left Open. Set it at “H” or “L” level.
12. For superimposed, a 1.7v DC voltage should be applied directly to an input pin.
Ⴠ6HOHFWLRQRIRUGHUW\SH
% $ 7 6 5 4 )
Part No.
BA7654F
BA7653AF/AFV
BA7652AF
( 2
Tape and Reel information
SOP8
<Dimension>
5.0±0.2
85
<Tape and Reel information>
Tape
Embossed carrier tape
Quantity 2500pcs
Direction
of feed
E2
(The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand)
14
0.15±0.1
1.27
0.1
0.4±0.1
SSOP-B8
<Dimension>
(Unit:mm)
3.0±0.2
85
14
0.15±0.1
(0.52)
0.1
0.22±0.1
0.65
Reel
1Pin
ᙾWhen you order , please order in times the amount of package quantity.
<Tape and Reel information>
Tape
Embossed carrier tape
Quantity 2500pcs
Direction
of feed
E2
(The direction is the 1pin of product is at the upper left when you hold
reel on the left hand and you pull out the tape on the right hand)
Reel
1Pin
ᙾWhen you order , please order in times the amount of package quantity.
8/8
Share Link: 