TQ4SA-L2-1.5 Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
TQ4SA-L2-1.5
Panasonic Corporation
TQ4SA-L2-1.5 Datasheet PDF : 12 Pages
| |||
TQ
[M.B.B. type]
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
3V DC
4.5V DC
5V DC
6V DC
9V DC
80%V or less of
nominal voltage*
(Initial)
12V DC
24V DC
*Pulse drive (JIS C 5442-1986)
Drop-out voltage
(at 20°C 68°F)
10%V or more of
nominal voltage*
(Initial)
Nominal operating
current
[±10%] (at 20°C 68°F)
66.7mA
44.4mA
40mA
33.3mA
22.2mA
16.7mA
8.3mA
Coil resistance
[±10%] (at 20°C 68°F)
45Ω
101Ω
125Ω
180Ω
405Ω
720Ω
2,880Ω
Nominal operating
power
200mW
Max. applied voltage
(at 20°C 68°F)
150%V of
nominal voltage
2. Specifications
Characteristics
Contact
Rating
Item
Arrangement
Initial contact resistance, max.
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*2
Nominal
operating power
Single side stable
1 coil latching
2 coil latching
Insulation resistance (Initial)
Electrical
characteristics
Mechanical
characteristics
Expected life
Breakdown
voltage (Initial)
Between open contacts
Between contact and coil
Between contact sets
Temperature rise (at 20°C 68°F)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Shock
resistance
Functional
Destructive
Vibration
resistance
Functional
Destructive
Mechanical (at 180 cpm)
Electrical (at 20 cpm)
Conditions
Unit weight
Conditions for operation, transport and
storage*3
Max. operating speed (at rated load)
Specifications
2 Form C, 2 Form D (M.B.B.)
4 Form C
Max. 50mΩ (By voltage drop 6 V DC 1A)
Ag+Au clad
1 A 30 V DC, 0.5 A 125 V AC*1 (resistive load)
30 W (DC), 62.5 V A (AC)*1 (resistive load)
110 V DC, 125 V AC*1
1A
10µA 10mV DC
Standard (B.B.M) type: 140 mW (3 to 12 V DC),
200 mW (24 V DC), 300 mW (48 V DC)
M.B.B. type: 200 mW
280 mW (3 to 24 V DC), 400 mW (48 V DC)
100 mW (3 to 12 V DC), 150 mW (24 V DC)
200 mW
200 mW (3 to 12 V DC), 300 mW (24 V DC)
400 mW
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Standard (B.B.M) type: 750 Vrms for 1min. (Detection current: 10 mA),
M.B.B. type: 300 Vrms for 1 min. (Detection current: 10 mA)
1,000 Vrms for 1min. (Detection current: 10 mA)
1,000 Vrms for 1min. (Detection current: 10 mA)
Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Standard (B.B.M) type: Min. 108, M.B.B. type: Min. 107
Standard (B.B.M) type: Min. 2×105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive)
M.B.B. type: Min. 105 (1 A 30 V DC resistive)
Standard (B.B.M) type:
Ambient temperature: –40°C to +70°C –40°F to +158°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
M.B.B. type:
Ambient temperature: –40°C to +50°C –40°F to +122°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 cpm
Approx. 1.5 g .053 oz
Approx. 3 g .106 oz.
Notes: *1 AC is standard (B.B.M) type only.
*2 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level])
*3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
■ Surface-mount terminal
1. Coil data
1) Single side stable
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
5V DC
6V DC
9V DC
12V DC
24V DC
Pick-up voltage
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
48V DC
Drop-out voltage
(at 20°C 68°F)
10%V or more of
nominal voltage*
(Initial)
Nominal operating
current
(at 20°C 68°F)
93.8mA
46.7mA
31mA
28.1mA
23.3mA
15.5mA
11.7mA
8.3mA
6.3mA
Coil resistance
[±10%] (at 20°C 68°F)
16Ω
64.3Ω
145Ω
178Ω
257Ω
579Ω
1,028Ω
2,880Ω
7,680Ω
Nominal operating
power
140mW
200mW
300mW
Max. applied voltage
(at 20°C 68°F)
150%V of
nominal voltage
120%V of
nominal voltage
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Share Link: