PM9106AP
Note 1: Resistor (R1 and R2) values are dependant upon the selected value of RSH.
Note 2: See the table below, detailing the component values for the selected voltage
standard.
Note 3: Resistors (R8 to R14) are current limiting resistors required to set the intensity
of the LED display segments.
Note 4: Capacitor (C5) to be positioned as close to Supply Pins (VDD & VSS) of IC-1 as
possible.
Note 5: See TYPICAL APPLICATIONS when selecting the value of RSH.
Item
13
14
Symbol
R3A
R3B
Description
PM9106APA
115V
120kΩ
82kΩ
PM9106APE
230V
200kΩ
180kΩ
Detail
ORDERING INFORMATION
Part Number
Description
PM9106APA
PM9106APE
115V, 80A Module
230V, 80A Module
sames
9/10