EM91865 Ver la hoja de datos (PDF) - ELAN Microelectronics

Número de pieza

componentes Descripción

Fabricante

EM91865

13 MEMORY TONE/PULSE DIALER WITH HF, HD, REDIAL AND VOLUME CONTROL FUNCTION

ELAN Microelectronics 

One Touch memory :

EM91865

13 MEMORY TONE/PULSE DIALER WITH HF, HD, REDIAL

AND VOLUME CONTROL FUNCTION

Preliminary

The EM91865 incorporated 13 sets one touch memory each one can store numbers up to 16 digits. In memory

storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored into specific

memory.

Storing of 13 sets memory :

On-Hook or Off-Hook state, push (ST, d1, d2,.....di, [ST], EMn or Mn). The numbers d1, d2,....di will be stored

into memory location "n", the "n" expressed digital key from 1~3 for EM and 0~9 for M.

Dialing (after memory dialed out, the numbers of memory will copy to LNB) :

• To select Pulse or Tone mode.

• Off-hook (or turn on HF function), push EMn or Mn key. The memory content will be dialed out.

Two Touch memory :

The EM91865 incorporated 10 sets two touch memory each one can store numbers up to 16 digits. In memory

storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored into specific

memory.

Storing of 10 sets two Touch memory :

On-Hook or Off-Hook state, push (ST, d1, d2,.....dn, ST, m). The numbers d1, d2,....dn will be stored into memory

location "Mm", the "m" expressed digital key from 0~9 map to M0~M9.

Dialing (after memory dialed out, the numbers of memory will copy to LNB) :

• To select Pulse or Tone mode.

• Off-hook(or turn on HF function), push(RC , m). The memory content in Mm will be dialed out.

Cascade dialing :

Let EM1=1,2,3

EM2=4,5,6

EM3=7,8,9

At off-hook state, key in EM1, EM2, EM3, the LNB=1,2,3,4,5,6,7,8,9, and the number will be dialed out.

The max. cascade dialing numbers are 32 digits.

Mixing dialing :

Let LNB=7,8,9

M2=4,5,6

EM1=1,2,3

At off-hook state, key in "RD", EM1, *, 0, P, ( A , 2 ) , then the LNB=7,8,9,1,2,3,*, 0, P,4,5,6, and the number

will be dialed out.

Pulse to Tone(*/T) key operation

The Pulse to Tone(*/T) key is designed to support toll dialing (long distance call) or PABX system operation.

The "*/T" key can be stored in memory and it will be occupy one digital position.

• To select Pulse mode.

• Off-hook(or turn on HF function), push d1, d2,...dn, */T, k1, k2, ....,kn. These numbers will be dialed out as

following sequence :

* This specification are subject to be changed without notice.

4.28.1999 6

Share Link: