IN91350AN Ver la hoja de datos (PDF) - Integral Corp.
Número de pieza
componentes Descripción
Fabricante
IN91350AN Datasheet PDF : 11 Pages
| |||
IN91350A
7. Flash
Off Hook (or On Hook & HFI
)F
1.Flash key can not be stored as a digit in memory
and it has the first priority of the keyboard
function.
2.The system will return to the initial state after the
break time is finished.
8. Mix Dialing
Off Hook (or On Hook & HFI
)
1. Normal dialing + Repertory dialing
+
Normal dialing
2. Repertory dialing + Normal dialing
+ Repertory dialing
3.
Redialing
+ Normal dialing
+ Repertory dialing
a.Redialing and Save dialing are valid just for first
key in.
b.The second sequence should not be operated until
the first sequence is dialed out completely.
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
VCC
VIN
VOUT
PD
Tstg
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
Power Dissipation in Still Air,
Plastic DIP**
Storage Temperature
-0.3 to +7.0
V
-0.3 to VCC +0.3
V
-0.3 to VCC +0.3
V
500
mW
-55 to +150
°C
* Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
** Durating: -10 mW/°C from 65°C to 70°C.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
VCC
VIN
VOUT
TA
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND)
Operating Temperature
Min
Max
Unit
2.0
5.5
V
0
VCC
V
0
VCC
V
-20
+70
°C
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range
GND≤(VIN or VOUT)≤VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC).
Unused outputs must be left open.
2
Share Link: 