LA8518NM Ver la hoja de datos (PDF) - SANYO -> Panasonic

Número de pieza

componentes Descripción

Fabricante

LA8518NM

Signal Processor for Cordless Telephone Base Sets

SANYO -> Panasonic 

LA8518NM

c Balancing Network

It is possible to switch the Balancing Network between two systems, one for the near end and one for the far end, in accordance

with the line current. (Refer to Fig. 1 for the connection method.) In addition, the switching point can be varied by connecting the

PADC pin (pin 50) to GND or to S. VCC (pin 63) via a resistor.

(When using only one Balancing Network, refer to Fig. 2.)

Line

LA8518NM

Fig. 2

Note) The constant of Balancing Network is a reference value.

c The DC characteristics when the power is off

Load

LA8518NM

By connecting a load to VSP (pin 62), it is possible to change the DC characteristics without changing the DC characteristics only

when the power is off. (Refer to the diagram below.)

DC characteristics (Power on)

DC characteristics (Power off)

No load

No change

Line current, IL − mA

Line current, IL − mA

No.5421-18/31

Share Link: