LC895925 Ver la hoja de datos (PDF) - SANYO -> Panasonic
Número de pieza
componentes Descripción
Fabricante
LC895925 Datasheet PDF : 7 Pages
| |||
LC895925
Specifications
Maximum Ratings at Ta = 25°C, VSS = 0 V
Parameter
Maximum power supply voltage
I/O voltage
Maximum power dissipation
Operating temperature
Storage temperature
Solder resistance
Symbol
VDD max
VI, VO
Pd max
Topr
Tstg
Ta ≤ 70°C
10 seconds
Conditions
Ratings
Unit
–0.3 to +7.0
V
–0.3 to VDD+0.3
V
600
mW
–30 to +70
°C
–55 to +125
°C
260
°C
Permissible Operating Range at Ta = –30 to +70°C, VSS = 0 V
Parameter
Supply voltage
Input voltage range
Symbol
VDD
VIN
Conditions
min
4.5
0
Ratings
typ
5.0
Unit
max
5.5
V
VDD
V
DC Characteristics at Ta = –30 to +70°C, VSS = 0 V, VDD = 4.5 to 5.5 V
Parameter
Input high level voltage
Input low level voltage
Input high level voltage
Input low level voltage
Input high” level voltage
Input low level voltage
Output high level voltage
Output low level voltage
Output high level voltage
Output low level voltage
Output high level voltage
Output low level voltage
Output low level voltage
Input leak current
Pull-up resistance
The pin types above refer to the following groups.
Symbol
VIH
VIL
VIH
VIL
VIH
VIL
VOH
VOL
VOH
VOL
VOH
VOL
VOL
IIL
RUP
Conditions
TTL levels, for pin types 1 and 6
TTL levels, for pin type 4, with pull-up resistors
TTL levels, for pin 0 and 7, with Schmitt inputs
IOH = –2 mA, for pin type 3
IOL = 2 mA, for pin type 3
IOH = -2 mA, for pin types 2, 4, and 6
IOL = 2 mA, for pin types 2, 4, and 6
IOH = -48 mA, for pin type 7
IOL = 48 mA, for pin type 7
IOL = 2 mA, for pin type 5
VI = VSS, VDD, for pin types 0, 1, 6, and 7
For pin types 4 and 5
min
2.2
2.2
2.5
VDD – 2.1
VDD – 2.1
VDD – 2.1
–10
40
Ratings
typ
80
Unit
max
V
0.8
V
V
0.8
V
V
0.6
V
V
0.4
V
V
0.4
V
V
0.4
V
0.4
V
+10
µA
160
kΩ
Input
(0) BCK, BICLKIN, BIDATAI, C2PO, LOCKIN, LRCK, PLLOUTIN, ROUGH, SBSO, SCOR, SDATA, WFCK, CS,
RD, WR
(1) SUA0 to SUA6, TEST0 to TEST6, X1EN, RESET
Output
(2) CLV+, CLV–, FSW
(3) DATACKO, EFM, EFMG, EFMGATE0 to EFMGATE6, EXCK, LOCK, MCK, MON, PSUBSYNC, RA0 to RA9,
SUBSYNC, CAS0 to CAS1, RAS0 to RAS1, ERROR, EXTACK, FRCK, LWE, UWE, OE
Input/Output
(4) D0 to D7, IO0 to IO15
(5) INT0 to INT1, SWAIT
(6) ATIPSYNC, Reserve0 to Reserve5
(7) ACK, ATN, BSY, C/D, DB0 to DB7, DBP, I/O, MSG, REQ, RST, SEL
Note: The XTAL0, XTAL1, XTALCK0, and XTALCK1 pins fall outside of these DC characteristic specifications.
No. 5784-2/7
Share Link: 