www.datel.com
Actual Size
®
®
DMS-20PC-1-LM
Self-Powered, 3 Digit, LED
AC Line Voltage Monitors
Features
• Plugs directly into USA-style wall outlets
• Screw terminals for panel mounting
• Small 1.38" x 0.88" x 1.0" packages
• Large, easy-to-read, red LED displays
• Fully encapsulated for harsh environments
• Half-wave averaging, rms calibrated
• UL, CSA and IEC1010-1 certified
• Very low cost!
Functional Specifications
Input
Voltage Range ➀
Overvoltage Protection
Frequency Range ➀
Current Consumption
85-264Vrms
300Vrms (Overvoltage category II)
47-63Hz
50mArms (max.)
Performance
Sampling Rate
Measurement Type
Accuracy @ +25°C
Temperature Drift
(–25 to +60°C)
2.5 readings/second
Half-wave average, rms calibrated
for sinusoidal input
±1V (typ.), ±2V (max.)
±0.15 Volts/°C (max.)
Mechanical
Dimensions
DisplayType
Weight
Case Material
1.38" x 0.88" x 1.00"
3 digit, red LED, 0.37"/9.4mm
1 ounce (28 grams)
Polycarbonate
Environmental
Operating Temperature
Storage Temperature
Humidity (Non-condensing)
–25 to +60°C
–40 to +75°C
0 to 95%
➀ Operation and accuracy at inputs above or below these
ranges are not specified.
Ordering Information
DMS-20PC-1-LM
With threaded terminations and screws
DMS-20PC-1-LM-F With blade terminals, factory installed
DMS-20PC-1-LM-R With round terminals, factory installed
DMS-20-CP
Panel cutout punch
DMS-BZL3
Panel mount bezel
DMS-BZL4
Panel mount bezel with sealing gasket
Brass screws (6-32 thread) and a panel-mount retaining clip are
supplied with each meter
DATEL's DMS-20PC-1-LM is a component-size, self-contained, low-cost
ac voltmeter for true line measurements. It requires no additional components
or auxiliary power. Simply plug it into any wall outlet and instantly read
voltages from 85 to 264Vac (47-63Hz). The large (0.37"/9.4mm), bright red
LED display makes the DMS-20PC-1-LM easily readable under any lighting
conditions.
DMS-20PC-1-LM employs half-wave sinusoidal
averaging (rms calibrated) and has a
display resolution of 1Vac over its full input
DMS-20PC-1-LM-F
(With blade terminals)
range. Packaged in a red-filter case with
built-in bezel, the meter is fully encapsu-
lated for ruggedness. All units are overvolt-
age
protected to 300Vac.
This low-cost meter is ideal for industrial,
DMS-20PC-1-LM-R
(With round terminals)
Other NEMA
configurations
available on
request
laboratory, office and field-service applications.
Its miniature size is perfect for design into high-
DMS-20PC-1-LM
(Panel mount)
end consumer electronics, laboratory instru-
mentation and other products requiring accurate ac
line monitoring.
Suggested
wiring
(User supplied)
Mechanical Specifications
Dimensions in inches (millimeters)
Tolerances: 2 PL Dec ±0.02 (±0.51)
3 PL Dec ±0.010 (±0.254)
Recommended panel cutout dimensions:
1.336 (33.93)W × 0.838 (21.29)H
Internal corner radii 0.032 (0.81) Max.
0.04
(1.016)
1.30
(33.0)
#6-32
UNC THD
0.04
(1.016)
0.04
(1.016)
1.38
(35.1)
0.44
(11.2) 0.80
(20.3)
0.88 0.37
(22.4) (9.4)
0.75
(19.1)
0.32
(8.1)
1.00
(25.4)
#2-56 INSERT
0.156 (3.96) DEEP
0.19
(4.8)
1.07
(27.2)
DMS-BZL3
Optional Bezel
1.28
(32.5)
0.10
(2.5)
1.63 (41.4)
1.83 (46.5)
0.10
(2.5)
DS-0281B 1/99
DATEL, Inc., Mansfield, MA 02048 (USA) • Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 • Email: sales@datel.com • Internet: www.datel.com
DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained
herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.