RP1-1.5V Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
RP1-1.5V Datasheet PDF : 5 Pages
| |||
RP
2. Specifications
Characteristics
Contact
Item
Arrangement
Initial contact resistance, max.
Contact material
Rating
High frequency
characteristics (Initial)
(Impedance 50Ω)
Contact rating
Nominal operating power (single side stable type)
V.S.W.R.
Insertion loss (without D.U.T. board’s loss)
Isolation
Electrical
characteristics
Insulation resistance (Initial)
Breakdown Between open contacts
voltage (Initial) Between contact and coil
Temperature rise (at 20°C)
Operate time (at 20°C)
Mechanical
characteristics
Expected life
Conditions
Unit weight
Release time (at 20°C)
Shock
resistance
Vibration
resistance
Mechanical
Electrical
Functional
Destructive
Functional
Destructive
Conditions for operation, transport and storage*
Max. operating speed (at rated load)
Specifications
1 Form C
Max.50mΩ (By voltage drop 6V DC 0.1A)
Stationary: Ag + Au clad, Movable: AgPd
0.1A 30V DC (resistive load); Contact carrying power: 3W (Max. 1.2GHz);
1W (Max. 1.8GHz); Contact switching power: 1W (Max. 1.8GHz)
140mW (1.5 to 12V DC), 270mW (24V DC)
Max. 1.2 (at 1GHz), Max. 1.3 (at 1.8GHz)
Max. 0.5dB (at 1GHz), Max. 1dB (at 1.8GHz)
Min. 15dB (at 1GHz), Min. 10dB (at 1.8GHz)
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
750 Vrms for 1min. (Detection current: 10mA)
1,500 Vrms for 1min. (Detection current: 10mA)
Max. 50°C (By resistive method, nominal voltage applied to the coil, contact carrying
power: 1W/at 1.8GHz)
Max. 3ms (Approx. 1.5ms) (Nominal operating voltage applied to the coil, excluding
contact bounce time.)
Max. 2ms (Approx. 1ms) (Nominal operating voltage applied to the coil, excluding contact
bounce time.) (without diode)
Min. 500 m/s2 {Approx. 50G} (Half-wave pulse of sine wave: 11ms; detection time: 10µs.)
Min. 1,000 m/s2 {Approx. 100G} (Half-wave pulse of sine wave: 6ms.)
10 to 55 Hz at double amplitude of 3mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5mm
Min. 5×106 (at 180 cpm)
Min. 105 (0.1A 30V DC resistive load, 1W (at 1.8GHz, V.S.W.R. max. 1.3 at 20 cpm)
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 cpm (at rated load)
Approx. 1 g .04 oz
Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT
in GENERAL APPLICATION GUIDELINES.
REFERENCE DATA
1. High frequency characteristics
Sample: RP1-6V
Measuring method: Impedance 50Ω
Measuring tool:
6–1.60 dia
.063 dia
6–1.00 dia
.039 dia
mm inch
26–0.80 dia
.031 dia
6–2.30 dia
.090 dia
18.92
0.60
.024
.745
1.94
.076
PC board
• Double-sided through hole
• Material: Glass-epoxy resin
• t = 1.0mm .039 inch
• Copper plated thickness: 35 µm
18.00 7.62
.709 .300
4.22 9.82
.166 .387
5.08
.200
Soldering
SMA connector
• V.S.W.R
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
NC (Terminal Nos. 4-5)
1.4
NO (Terminal Nos. 5-6)
1.2
1.0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Frequency, GHz
• Insertion loss
5
4
3
2
N.O. (Terminal Nos. 5-6)
N.C. (Terminal Nos. 4-5)
1
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Frequency, GHz
• Isolation
100
90
80
70
60
50
40
30
20
10
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Frequency, GHz
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Share Link: 