PULSE DIALER
TECHNICAL DATA
IN9151-3
The IN9151-3 pulse dialer is a monolithic CMOS integrated circuit which
converts pushbutton inputs to a series of pulses suitable for telephone
dialing. It is intended to replace mechanical telephone dialers and can
operate directly from telephone lines. CMOS technology is used to
produced this device, resulting in very low power requirements and high
noise immunity. The IN9151-3 can be easily interfaced with a variety of
telephones, requiring only a minimal number of external components.
• Direct telephone line operation
• 4 x 3 matrix keyboard interface
• Supply voltage range of 2.0 to 5.5 volts
• Inexpensive RC oscillator
• Low power standby mode for redialing
• 22-digit redial memory
• Redial with either * or # key
• Dialer reset for line power breaks > 200 ms
• Selectable make/break ratio
• High speed test capacity
ORDERING INFORMATION
IN9151N-3 Plastic
TA = -20° to 70° C for package
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 5 = VCC
PIN 12 = GND
KEYBOARD ASSIGNMENT
R1 1 2 3
R2 4 5 6
R3 7 8 9
R4 * 0 #
C1 C2 C3
(*,# : Redial)
1