Product Specification
4. Technical requirements:
4.1. Schematic:
The following drawing illustrates the schematic of this product.
CPF113F
4.2. HP-r definition :
To facilitate the test of the splitter , the high pass data have to be taken into consideration.
Capacitors of 0.1uF on the NT-side are connected in series with 0.12uF capacitors in the
tip-And ring-line of the ADSL-output of the splitter itself(see block diagram above). The
equivalent circuit diagram of the NT-side is shown below :
Data sheet subject to change without notice
RDPS-POTS332(R0)01/17/2002
SHEET 5 OF 12