LB1924
Continued from preceding page.
Pin No. Pin
Pin function
9
XO Crystal oscillator connection.
10
XI The reference clock signal is generated by connecting a
crystal oscillator element to these pins.
If an external clock (with a frequency of a few MHz) is used,
connect that signal to the XI pin through a series resistor of
about 13 kΩ, and leave the XO pin open.
Equivalent circuit
11 INTOUT Integrator amplifier output (speed control output)
12
INTIN Integrator amplifier input
PWM comparator
13
POUT PLL circuit output
Continued on next page.
No. 5687-9/11