ADS-112MM Ver la hoja de datos (PDF) - DATEL Data Acquisition products

Número de pieza

componentes Descripción

Fabricante

ADS-112MM

12-Bit, 1MHz, Low-Power Sampling A/D Converters

DATEL Data Acquisition products  

ADS-112

24

1

®

®

MECHANICAL DIMENSIONS INCHES (mm)

1.31 MAX.

(33.27)

13

0.80 MAX.

(20.32)

12

Dimension Tolerances (unless otherwise indicated):

2 place decimal (.XX) ±0.010 (±0.254)

3 place decimal (.XXX) ±0.005 (±0.127)

Lead Material: Kovar alloy

Lead Finish: 50 microinches (minimum) gold plating

over 100 microinches (nominal) nickel plating

0.235 MAX.

(5.969)

0.100 TYP.

(2.540)

1.100

(27.940)

PIN 1 INDEX

0.200 MAX.

(5.080)

0.190 MAX.

(4.826)

0.018 ±0.002

(0.457)

0.100

(2.540)

0.040

(1.016)

SEATING

PLANE

0.025

(0.635)

0.010

+0.002

–0.001

(0.254)

0.600 ±0.010

(15.240)

0.100

(2.540)

ORDERING INFORMATION

MODEL NUMBER

ADS-112MC

ADS-112MM

ADS-112/883

OPERATING TEMP. RANGE

0 to +70°C

–55 to +125°C

–55 to +125°C

ACCESSORIES

ADS-EVAL4

HS-32

Evaluation Board (without ADS-112)

Heat Sink for all ADS-112 models

For MIL-STD-883 product specification or availability of surface-mount packaging, contact DATEL. Receptacles for PC mounting

can be ordered through AMP Inc., Part # 3-331272-8 (Component Lead Socket), 24 required.

®

®

ISO 9001

REGISTERED

DS-0149F

10/96

DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151

Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356

Internet: www.datel.com E-mail:sales@datel.com

Data Sheet Fax Back: (508) 261-2857

DATEL (UK) LTD. Tadley, England Tel: (01256)-880444

DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: 1-34-60-01-01

DATEL GmbH München, Germany Tel: 89-544334-0

DATEL KK Tokyo, Japan Tel: 3-3779-1031, Osaka Tel: 6-354-2025

DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein

do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.

Share Link: