TDA4510/V9 Ver la hoja de datos (PDF) - Philips Electronics
Número de pieza
componentes Descripción
Fabricante
TDA4510/V9 Datasheet PDF : 14 Pages
| |||
Philips Semiconductors
PAL decoder
Product specification
TDA3561A
GENERAL DESCRIPTION
The TDA3561A is a decoder for the PAL colour television standard. It combines all functions required for the identification
and demodulation of PAL signals. Furthermore it contains a luminance amplifier, an RGB-matrix and amplifier. These
amplifiers supply output signals up to 5 V peak-to-peak (picture information) enabling direct drive of the discrete output
stages. The circuit also contains separate inputs for data insertion, analogue as well as digital, which can be used for
text display systems (e.g. (Teletext/broadcast antiope), channel number display, etc. Additional to the TDA3560, the
circuit includes the following features:
• The peak white limiter is only active during the time that the 9,3 V level at the output is exceeded. The start of the
limiting function is delayed by one line period. This avoids peak white limiting by test patterns which have abrupt
transitions from colour to white signals.
• The brightness control is obtained by inserting a variable pulse in the luminance channel. Therefore the ratio of
brightness variation and signal amplitude at the three outputs will be identical and independent of the difference in gain
of the three channels. Thus discolouring due to adjustment of contrast and brightness is avoided.
• Improved suppression of the internal RGB signals when the device is switched to external signals, and vice versa.
• Non-synchronized external RGB signals do not disturb the black level of the internal signals.
• Improved suppression of the residual 4,4 MHz signal in the RGB output stages.
• Cascoded stages in the demodulators and burst phase detector minimize the radiation of the colour demodulator
inputs.
• High current capability of the RGB outputs and the chrominance output.
QUICK REFERENCE DATA
Supply voltage
Supply current
Luminance input signal (peak-to-peak value)
Chrominance input signal (peak-to-peak value)
Data input signals (peak-to-peak value)
RGB output signals at nominal contrast
and saturation (peak-to-peak value)
Contrast control range
Saturation control range
Input voltage for data insertion
Blanking input voltage
Burst gating and black-level gating input voltage
V1−27
I1
V10-27(p-p)
V3-27(p-p)
V13, 15, 17-27(p-p)
V12, 14, 16-27(p-p)
V9-27
V8-27
V8−27
type. 12
V
typ. 85
mA
typ. 0,45 V
55 to 1100 mV
typ. 1
V
typ. 5,25 V
typ. 20
dB
min. 50
dB
min. 0,9 V
typ. 1,5 V
typ. 7
V
PACKAGE OUTLINE
28-lead DIL; plastic (SOT 117); SOT117-1; 1996 November 21.
September 1982
2
Share Link: 