M24C16-W M24C16-R M24C16-F
7
Maximum rating
Maximum rating
Stressing the device outside the ratings listed in Table 4 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the operating sections of this specification, is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Table 4. Absolute maximum ratings
Symbol
Parameter
Min.
Max. Unit
Ambient operating temperature
–40
130
°C
TSTG
TLEAD
Storage temperature
Lead temperature during soldering
PDIP-specific lead temperature during soldering
–65
150
°C
see note(1)
°C
-
260(2)
°C
IOL
VIO
VCC
VESD
DC output current (SDA = 0)
Input or output range
Supply voltage
Electrostatic pulse (Human Body model)(3)
-
5
mA
–0.50
6.5
V
–0.50
6.5
V
-
3000(4)
V
1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK®
7191395 specification, and the European directive on Restrictions of Hazardous Substances (RoHS
directive 2011/65/EU of July 2011).
2. TLEAD max must not be applied for more than 10 s.
3. Positive and negative pulses applied on different combinations of pin connections, according to AEC-
Q100-002 (compliant with ANSI/ESDA/JEDEC JS-001-2012 standard, C1=100 pF, R1=1500 Ω).
4. 4000 V for devices identified by process letters S or G.
DocID023494 Rev 6
21/39
38