3055 Ver la hoja de datos (PDF) - Allegro MicroSystems

Número de pieza

componentes Descripción

Fabricante

3055

MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR ICs

Allegro MicroSystems 

3055

MULTIPLEXED

TWO-WIRE HALL EFFECT

SENSOR IC

Dimensions in Inches

(controlling dimensions)

0.183

0.178

0.063

0.059

Dimensions in Millimeters

(for reference only)

4.65

4.52

1.60

1.50

0.181

0.176

0.086 1

2

3

MAX

0.560

MIN

SEE NOTE

0.016

4.60

4.47

45°

0.018

2.18 1

2

3

MAX

0.015

14.22

MIN

SEE NOTE

0.41

45°

0.46

0.38

0.050

0.100

Dwg. MH-003C in

1.27

2.54

Dwg. MH-003C mm

NOTES: 1. Tolerances on package height and width represent allowable mold offsets. Dimensions given are measured at the widest point (parting

line).

2. Exact body and lead configuration at vendor’s option within limits shown.

3. Height does not include mold gate flash.

4. Recommended minimum PWB hole diameter to clear transition area is 0.035” (0.89 mm).

5. Where no tolerance is specified, dimension is nominal.

6. Minimum lead length was 0.500” (12.70 mm). If existing product to the original specifications is not acceptable, contact sales office before

ordering.

Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the

detail specifications as may be required to permit improvements in the design of its products.

The information included herein is believed to be accurate and reliable. However, Allegro

MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or other

rights of third parties which may result from its use.

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

Share Link: