A42MX36-PL100ES Ver la hoja de datos (PDF) - Actel Corporation

Número de pieza

componentes Descripción

Fabricante

A42MX36-PL100ES

40MX and 42MX FPGA Families

Actel Corporation 

FPGA Families 40MX and 42MX

Previous version

5.1

v5.0

v4.0.1

Changes in current version (v 6. 0 )

Page

In the 160-Pin PQFP table, the following pins changed:

Pin 61 (42MX09, 42MX16, and 42MX64) has changed to LP

2-10

In the 208-Pin PQFP table, the following pins changed:

Pin 129 (42MX09, 42MX16, and 42MX64) has changed to LP

Pin 198 (42MX09) has changed to I/O

2-14

The n the 240-Pin PQFP table, the following pins changed:

Pin 91 (42MX36) has changed to LP

2-18

In the 100-Pin VQFP Package table, the following pins changed:

Pin 62 (42MX09 and 42MX16) has changed to LP

2-23

In the 176-Pin TQFP table, the following pins changed:

Pin 109 (42MX09 and 42MX16) has changed to LP

2-25

In the 272-Pin PBGA table, the following pins changed:

Pin K20 (42MX36) has changed to LP

2-35

The "Low Power Mode" section was updated.

1-7

Footnote 8 in the Table 9 • 5V TTL Electrical Specifications was updated.

1-15

Footnote 8 in the Table 13 • 3.3V LVTTL Electrical Specifications was updated.

1-17

Because the changes in this data sheet are extensive and technical in nature, this should be viewed ALL

as a new document. Please read it as you would a data sheet that is published for the first time.

Note that the “Package Characteristics and Mechanical Drawings” section has been eliminated

from the data sheet. The mechanical drawings are now contained in a separate document,

“Package Characteristics and Mechanical Drawings,” available on the Actel web site.

Datasheet Categories

In order to provide the latest information to designers, some datasheets are published before data has been fully

characterized. Datasheets are designated as "Product Brief," "Advanced," "Production," and "Datasheet

Supplement." The definitions of these categories are as follows:

Product Brief

The product brief is a summarized version of a datasheet (advanced or production) containing general product

information. This brief gives an overview of specific device and family information.

Advanced

This datasheet version contains initial estimated information based on simulation, other products, devices, or speed

grades. This information can be used as estimates, but not for production.

Unmarked (production)

This datasheet version contains information that is considered to be final.

Datasheet Supplement

The datasheet supplement gives specific device information for a derivative family that differs from the general family

datasheet. The supplement is to be used in conjunction with the datasheet to obtain more detailed information and

for specifications that do not differ between the two families.

3-2

v6.0

Share Link: