M24M01-R M24M01-DF
Instructions
5.2
Read operations
Read operations are performed independently of the state of the Write Control (WC) signal.
After the successful completion of a Read operation, the device internal address counter is
incremented by one, to point to the next byte address.
For the Read instructions, after each byte read (data out), the device waits for an
acknowledgment (data in) during the 9th bit time. If the bus master does not acknowledge
during this 9th time, the device terminates the data transfer and switches to its Standby
mode.
Figure 10. Read mode sequences
&XUUHQW
$GGUHVV
5HDG
$&.
12$&.
'HYVHO
'DWDRXW
5:
5DQGRP
$GGUHVV
5HDG
$&.
$&.
$&.
$&.
12$&.
'HYVHO
%\WHDGGU
%\WHDGGU
'HYVHO
'DWDRXW
5:
5:
6HTXHQWLDO
&XUUHQW
5HDG
6HTXHQWLDO
5DQGRP
5HDG
$&.
$&.
'HYVHO
'DWDRXW
5:
$&.
12$&.
'DWDRXW1
$&.
$&.
$&.
$&.
$&.
'HYVHO
%\WHDGGU
%\WHDGGU
'HYVHO
'DWDRXW
5:
5:
$&.
12$&.
'DWDRXW1
$,G
DocID12943 Rev 14
19/47
46