SM1155XXX1S Ver la hoja de datos (PDF) - Nippon Precision Circuits
Número de pieza
componentes Descripción
Fabricante
SM1155XXX1S Datasheet PDF : 7 Pages
| |||
SM1155 series
Power-save Function
As shown in the preceding timing diagrams, the oscillator stops during non-play mode and the pull-down resis-
tance value changes in response to both HIGH-level and LOW-level inputs (power-save pull-down resistor) to
reduce power consumption and extend battery life.
Non-play oscillator stop function
When melody play ends, regardless of the state of TG, the internal oscillator stops and is placed in a standby
state. In this state, the current consumption, including input pin pull-down resistor current (IIH max), does not
exceed 3.3µA.
Power-save pull-down resistor
The resistance of the TG input pull-down resistor changes in response to the input voltage. The pull-down
resistance is 500kΩ when the input is HIGH, and the pull-down resistance is 135kΩ when the input is LOW.
Furthermore, if a light-dependent resistor (CdS) cell is employed as a switch (the pull-down resistance is max-
imum when the CdS resistance is minimum (light) and the pull-down resistance is minimum when the CdS
resistance is maximum (dark)), the combined resistance can be increased, decreasing current consumption.
Musical Specifications
Maximum program steps
A maximum of 64 steps can be programmed into internal mask-programmable ROM. Each step represents
either a note (sound pitch and length), a rest note, or a jump. The maximum number of jumps is 7.
Note length (including rests)
Eight rhythm values, from sixteenth note to half note, for notes and rests can be programmed, as shown in the
following table.
Code
Type
0
1
2
3
4
5
6
7
Note
Rest
Also, notes and rests longer than half notes and rests can be created using a tie to connect the notes. This
requires 2 program steps in ROM.
Tempo
The tempo for the standard quarter note can be selected from the following 16 options.
Code 0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
= 697 348 232 174 139 116 99.4 87 77.3 69.6 63.3 58 53.5 49.7 46.4 43.5
Pitch and scale
The SM1155 series devices support 3.5 octaves ranging from G3 to D7, from which 15 notes can be selected to
form a scale.
NIPPON PRECISION CIRCUITS—5
Share Link: 