HI-5700/883 Ver la hoja de datos (PDF) - Intersil
Número de pieza
componentes Descripción
Fabricante
HI-5700/883 Datasheet PDF : 8 Pages
| |||
Specifications HI-5700/883
Device Tested at:
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
AVDD = VDD = +5.0V; VREF+ = +4.0V; VREF- = GND = AGND = 0V; FS = Specified Clock Frequency at 50% Duty Cycle;
CL = 30pF; Unless Otherwise Specified.
PARAMETER
SYMBOL
CONDITIONS
GROUP A
SUBGROUP TEMPERATURE
LIMITS
MIN MAX
UNIT
Data Output Disable Time
tDIS
9
10, 11
+25oC
-
+125oC, -55oC
-
20
ns
25
ns
Data Output Delay
tOD
9
10, 11
+25oC
-
+125oC, -55oC
-
25
ns
30
ns
Data Output Hold
tH
9
+25oC
10
-
ns
10, 11
+125oC, -55oC
5
-
ns
Device Characterized at:
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (NOTE 1)
AVDD = VDD = +5.0V; VREF+ = +4.0V; VREF- = GND = AGND = 0V; FS = Specified Clock Frequency at 50% Duty
Cycle; CL = 30pF; Unless Otherwise Specified.
LIMITS
PARAMETER
Minimum Conversion Rate
SYMBOL
CONDITIONS
No Missing Codes
TEMPERATURE
+25oC, +125oC, -55oC
MIN MAX UNIT
-
0.125 MSPS
NOTE:
1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These pa-
rameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by character-
ization based upon data from multiple production runs which reflect lot to lot and within lot variation.
TABLE 4. ELECTRICAL TEST REQUIREMENTS
MIL-STD-883 TEST REQUIREMENTS
SUBGROUPS (SEE TABLES 1 AND 2)
Interim Electrical Parameters (Pre Burn-In)
1
Final Electrical Test Parameters
1 (Note 1), 2, 3, 9, 10, 11
Group A Test Requirements
1, 2, 3, 9, 10, 11
Groups C & D Endpoints
1
NOTE:
1. PDA applies to Subgroup 1 only. No other subgroups are included in PDA.
Spec Number 512023
6-12
Share Link: 