CXA3268AR
• DA
This adjusts the DA output voltage. See the AC Characteristics for the output level.
• MODE
This switches the input signal.
D3
Input signal
0
RGB input
1 Y/color difference input
• SYNC GEN
This sync generator mode stops all output pulses other than the HDO and VDO output pulses. The PS0,
PS1, PS2 and PS4 settings have priority over the SYNC GEN setting. Normally set to "0".
D5
Mode (SYNC GEN)
0 Normal operation
1
All output pulses and corresponding output blocks other than the HDO and VDO output pulses are
stopped.
• PS0, PS1, PS2, PS4
These perform the power saving settings for each input and output block. Be sure to use these settings as
described in "Power Supply and Power Saving Sequence". The power-on default for this IC is power saving
mode, so the settings should be canceled by serial communication after power-on.
D0, 1, 2, 4
0
1
Mode (PS0, PS1, PS2, PS4)
Normal operation
The respective outputs and corresponding output blocks are stopped.
– 31 –