CPF906G Ver la hoja de datos (PDF) - YCL Electronics

Número de pieza

componentes Descripción

Fabricante

CPF906G

Asymmetric Digital Subscriber Line

YCL Electronics  

Product Specification

CPF906G

1. Introduction:

The CPF906G is a splitter module that has been specifically designed to implement the

functionality of low pass filter in ISDN/POTS over ADSL application. The CPF906G integrate

low pass filter that block the high frequency energy from reaching the ISDN/POTS device and

provide isolation from impedance effects of the ISDN/POTS device on ADSL. Because the

ISDN/POTS splitter connects directly to the subscriber loop media , it must also provide some

protection for externally induced line hits or faults which could damage any attached

equipment or endanger humans interacting with the installed equipment. The circuit

protection will be provided mostly by standard central office line protection means and

additional protection measures built into splitter to protect against line overstress which could

damage the splitter itself. This splitter mainly consist of one low pass filter which provide

ISDN and POTS solution respectively

2. Reference:

Ref. 1 : ETSI TR 101 728 V1.1.1

Ref. 2 : ETSI TS 101 388 Asymmetric Digital Subscriber Line European specific

requirements

Ref. 3 : ANSI T1.413

Network and customer installation interface.

Ref. 4 : ITU G.992.1 Annex B

Ref. 5 : ITU-T K.21

Resistibility of telecommunication switching equipment to

Overvoltages and overcurrents .

3. Abbreviations:

ADSL

ISDN

CO

CPE

POTS

RT

ZADSL

Asymmetric Digital Subscriber Line

Integrated Service Digital Network

Central Office

Customer Premise Equipment.

Plain Old Telephone Service

Remote Terminal

Network termination of ADSL

Data sheet subject to change without notice

RDPS-POTS344(R0)04/03/2002

SHEET 3 OF 16

Share Link: