PRELIMINARY NSootimcee: pTahriasmisentroict alimfinitsalasrpeescuifbicjeactitotno. change.
A key input interrupt is controlled by the key input control register and
port direction registers. When the key input interrupt is enabled, set
“1” to the key input control register. A key input of any pin of ports
P00–P03, P54–P57 that have been set to input mode is accepted.
MITSUBISHI MICROCOMPUTERS
38C2 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
b7
b0 Key input control register
(KIC : address 0FF216)
P54 key input control bit
P55 key input control bit
P56 key input control bit
P57 key input control bit
P00 key input control bit
P01 key input control bit
P02 key input control bit
P03 key input control bit
0 : Key input interrupt disabled
1 : Key input interrupt enabled
Fig. 18 Structure of key input control register
21