Product Specification
5. Technical requirements:
5.1. Schematic: 1
The following drawing illustrates the schematic of this product.
MF600SWI
5.2. ZHP-r definition:
To facilitate testing of the Single In-Line filter independently of the actual modem or specific
vendor, ZHP-r is defined to allow proper termination of the ADSL port during voice band
testing. The ZHP-r is valid only for voice band frequency. The combination of capacitors in
the ZHP-r is only representative. The input shall be 27 nF however derived. ZHP-r
equivalent circuit is shown below.
0.056 uF
0.47 mH
100 ohms
0.056 uF
Data sheet subject to change without notice
RDPS-MF051(R1)10/01/2002
SHEET 5 OF 11