SBRS81100T3G-VF01 Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
SBRS81100T3G-VF01 Datasheet PDF : 4 Pages
| |||
MBRS1100T3G, SBRS81100T3G, MBRS190T3G, SBRS8190T3G
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
MBRS190T3
MBRS1100T3
Average Rectified Forward Current
TL = 163°C
TL = 148°C
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
Symbol
VRRM
VRWM
VR
IF(AV)
IFSM
Value
90
100
1.0
2.0
50
Unit
V
A
A
Operating Junction Temperature (Note 1)
TJ
−65 to +175
°C
Voltage Rate of Change
dv/dt
10
V/ns
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance − Junction−to−Lead (TL = 25°C)
Symbol
RqJL
Value
22
Unit
°C/W
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Value
Unit
Maximum Instantaneous Forward Voltage (Note 2) (iF = 1.0 A, TJ = 25°C)
VF
0.75
V
Maximum Instantaneous Reverse Current (Note 2)
(Rated dc Voltage, TJ = 25°C)
(Rated dc Voltage, TJ = 100°C)
IR
mA
0.5
5.0
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
ORDERING INFORMATION
Device
MBRS1100T3G
Marking
B1C
Package
SMB
(Pb−Free)
Shipping†
2500 / Tape & Reel
SBRS81100T3G*
B1C
SMB
2500 / Tape & Reel
(Pb−Free)
SBRS81100T3G−VF01*
B1C
SMB
(Pb−Free)
2500 / Tape & Reel
MBRS190T3G
B19
SMB
2500 / Tape & Reel
(Pb−Free)
SBRS8190T3G*
B19
SMB
2500 / Tape & Reel
(Pb−Free)
SBRS1100T3G
B19
SMB
2500 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*SBRS8 Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements
www.onsemi.com
2
Share Link: 