1ED020I12-FT Ver la hoja de datos (PDF) - Infineon Technologies

Número de pieza

componentes Descripción

Fabricante

1ED020I12-FT

Single IGBT Driver IC

Infineon Technologies 

EiceDRIVER™

1ED020I12-FT

Pin Configuration and FunctionalityPin Functionality

GND2 Reference Ground

Reference ground of the output chip.

OUT Driver Output

Output pin to drive an IGBT. The voltage is switched between VEE2 and VCC2. In normal operating mode Vout

is controlled by IN+, IN- and /RST. During error mode (UVLO, internal error or DESAT) Vout is set to VEE2

independent of the input control signals.

VCC2

Positive power supply pin of the output side.

TLSET Two Level Turn Off Adjust

Circuitry at TLSET adjust the two level turn off time with an external capacitor to GND2 and the two level voltage

with an external Zener diode to GND2, for wave forms please see Figure 9.

Final Data Sheet

12

Rev 2.0, 2012-07-31

Share Link: