MJ10020 Ver la hoja de datos (PDF) - Motorola => Freescale
Número de pieza
componentes Descripción
Fabricante
MJ10020
Motorola => Freescale
MJ10020 Datasheet PDF : 8 Pages
| |||
SWITCHING TIMES NOTE
MJ10020 MJ10021
In resistive switching circuits, rise, fall, and storage times
have been defined and apply to both current and voltage
waveforms since they are in phase. However, for inductive
loads which are common to SWITCHMODE power supplies
and hammer drivers, current and voltage waveforms are not
in phase. Therefore, separate measurements must be made
on each waveform to determine the total switching time. For
this reason, the following new terms have been defined.
tsv = Voltage Storage Time, 90% IB1 to 10% VCEM
trv = Voltage Rise Time, 10 – 90% VCEM
tfi = Current Fall Time, 90 – 10% ICM
tti = Current Tail, 10 – 2% ICM
tc = Crossover Time, 10% VCEM to 10% ICM
An enlarged portion of the inductive switching waveforms is
shown in Figure 7 to aid in the visual identity of these terms.
For the designer, there is minimal switching loss during
storage time and the predominant switching power losses
occur during the crossover interval and can be obtained us-
ing the standard equation from AN–222A:
^PSWT = 1/2 VCC IC (tc) f
In general, trv + tfi tc. However, at lower test currents this
relationship may not be valid.
As is common with most switching transistors, resistive
switching is specified at 25°C and has become a benchmark
for designers. However, for designers of high frequency con-
verter circuits, the user oriented specifications which make
this a “SWITCHMODE” transistor are the inductive switching
speeds (tc and tsv) which are guaranteed at 100_C.
RESISTIVE SWITCHING
10
7.0
5.0
VCC = 175 V
3.0
IC/IB = 25
2.0
TJ = 25°C
1.0
0.7
0.5
0.3
0.2
tr
0.1
0.07
0.05
td
0.03
0.02
0.01
0.6 0.8 1.0
2.0 3.0 5.0 7.0 10
20
40 60
IC, COLLECTOR CURRENT (AMPS)
Figure 10. Typical Turn–On Switching Times
2.0
VCC = 175 V
1.0 IC/IB = 25
0.7 VBE(off) = 5 V
0.5 TJ = 25°C
ts
0.3
0.2
0.1
tf
0.07
0.05
0.03
0.02
0.6 0.81.0
2.0 3.0 5.0 7.0 10
20
40 60
IC, COLLECTOR CURRENT (AMPS)
Figure 11. Typical Turn–Off Switching Times
1.0
0.1
0.01
0.1
SINGLE PULSE
RθJC(t) = RθJC
RθJC(t) = 0.7°C/W MAX
DETERMINE t2 FOR POWER
PULSE AND READ r(t)
TJ(pk) = TC + P(pk) RθJC(t)
P(pk)
t1
1.0
10
100
1000
t, TIME (ms)
Figure 12. Thermal Response
10000
Motorola Bipolar Power Transistor Device Data
5
Share Link: