Audio ICs
FExplanation of the data
(1) Division data: For D0 through D15 (When S = 1, use D4 through D15.)
BU2614 / BU2614FS
(2) CT: Frequency measurement beginning data
1: Beginning of measurement
0: Internal counter is reset, IFIN is pulldown.
(3) Output port control data: P0, P1, P2
1: Open drain output ON
2: Open drain output OFF
(4) R0, R1, R2, standard frequency data
(5) S: switch between FMIN and AMIN 0: FMIN
1: AMIN
(6) PS: If this bit is set to ON while AMIN is selected,
swallow counter division is possible.
(7) GT: Frequency measurement time and unlock
detection ON / OFF
(8) TS: Test data (0) is input.
121