HN58X25128 Ver la hoja de datos (PDF) - Renesas Electronics

Número de pieza

componentes Descripción

Fabricante

HN58X25128

Serial Peripheral Interface 128k EEPROM (16-kword × 8-bit)/256k EEPROM (32-kword × 8-bit)

Renesas Electronics 

HN58X25128FPIAG/HN58X25256FPIAG

Write Disable (WRDI):

One way of resetting the Write Enable Latch (WEL) bit is to send a Write Disable instruction to the device. As shown

in the following figure, to send this instruction to the device, chip select (S) is driven low, and the bits of the instruction

byte are shifted in, on serial data input (D).

The device then enters a wait state. It waits for the device to be deselected, by chip select (S) being driven high. The

Write Enable Latch (WEL) bit, in fact, becomes reset by any of the following events:

⎯ Power-up

⎯ WRDI instruction execution

⎯ WRSR instruction completion

⎯ WRITE instruction completion

Write Disable (WRDI) Sequence

VIH

S

VIL

VIH

W

VIL

VIH

C

VIL

VIH

D

VIL

0 1 2 345 6 7

Instruction

Q

High-Z

R10DS0225EJ0200 Rev.2.00

Nov 29, 2013

Page 11 of 19

Share Link: