CMX868 Ver la hoja de datos (PDF) - CML Microcircuits

Número de pieza

componentes Descripción

Fabricante

CMX868

Low Power V.22 bis Modem

CML Microcircuits 

Low Power V.22 bis Modem

CMX868

1.5.6 Rx DTMF/Tones Detectors

In Rx Tones Detect mode the received signal, after passing through the Rx Gain Control block, is fed to

the DTMF / Tones / Call Progress / Answer Tone detector. The user may select any of four separate

detectors:

The DTMF detector detects standard DTMF signals. A valid DTMF signal will set bit 5 of the Status

Register to 1 for as long as the signal is detected.

The programmable tone pair detector includes two separate tone detectors (see Figure 12). The first

detector will set bit 6 of the Status Register for as long as a valid signal is detected, the second detector

sets bit 7, and bit 10 of the Status Register will be set when both tones are detected.

The Call Progress detector measures the amplitude of the signal at the output of a 275 - 665 Hz

bandpass filter and sets bit 10 of the Status Register to 1 when the signal level exceeds the

measurement threshold.

10

0

-10

-20

dB

-30

-40

-50

-60

0

0.5

1

1.5

2

2.5

3

3.5

4

kHz

Figure 7a Response of Call Progress Filter

The Answer Tone detector measures both amplitude and frequency of the received signal and sets bit 6

or bit 7 of the Status Register when a valid 2225Hz or 2100Hz signal is received.

© 2004 CML Microsystems Plc

14

D/868/9

Share Link: