FM25Q32
12.8 AC Electrical Characteristics (cont’d)
DESCRIPTION
/HOLD Active Hold Time relative to CLK
SYMBOL ALT
SPEC
UNIT
MIN TYP MAX
tCHHH
5
㎱
/HOLD Not Active Setup Time relative to CLK
/HOLD Not Active Hold Time relative to CLK
/HOLD to Output Low-Z
/HOLD to Output High-Z
Write Protect Setup Time Before /CS Low
Write Protect Setup Time After /CS High
/CS High to Power-down Mode
/CS High to Standby Mode without Electronic
tHHCH
7
tCHHL
5
tHHQX(2) tLZ
tHLQZ(2) tHZ
tWHSL(3)
20
tSHWL(3)
100
tDP(2)
tRES1(2)
㎱
㎱
7
㎱
12
㎱
㎱
㎱
3
㎲
3
㎲
Signature Read
/CS High to Standby Mode with Electronic
tRES2(2)
1.8 ㎲
Signature Read
/CS High to next Instruction after Suspend
tSUS(2)
20
㎲
Write Status Register Time
Byte Program Time
Page Program Time
Sector Erase Time(4KB)
Block Erase Time(32KB)
Block Erase Time(64KB)
Chip Erase Time
tw
10 15
㎳
tBP
10 150 ㎲
tPP
1.5 5
㎳
tSE
40 300 ㎳
tBE1
200 1000 ㎳
tBE2
300 1500 ㎳
tCE
10 50
s
Notes:
1. Clock high + Clock low must be less than or equal to 1/fc.
2. Value guaranteed by design and/or characterization, not 100% tested in production.
3. Only applicable as a constraint for a Write Status Register instruction when Sector Protect Bit is
set to 1.
4. Commercial temperature only applies to Fast Read (FR1 & FR2). Industrial temperature applies to
all other parameters.
preliminary(Aug.18.2010) 54