ITS428L2 Ver la hoja de datos (PDF) - Infineon Technologies
Número de pieza
componentes Descripción
Fabricante
ITS428L2
Infineon Technologies
ITS428L2 Datasheet PDF : 13 Pages
| |||
PROFET® ITS428L2
Maximum Ratings at Tj = 25 °C unless otherwise specified
Parameter
Symbol
Supply voltage (overvoltage protection see page 4)
Supply voltage for full short circuit protection
Tj Start=-40 ...+150°C
LoRaI2d)=d2umΩp, RpLro=te4c.0tioΩn,1t)dV=L2oa0d0Dummps=,
VA
IN=
+ Vs, VA = 13.5
low or high
V
Load current (Current limit, see page 5)
Junction temperature
Operating temperature range
Storage temperature range
Power dissipation (DC), TC ≤ 25 °C
Maximal switchable inductance, single pulse
Vbb = 12V, Tj,start = 150°C, TC = 150°C const.
(See diagram on page 9) IL(ISO) = 7 A, RL = 0 Ω;
E4)AS=0.19J:
Electrostatic discharge capability (ESD)
IN:
(Human Body Model)
ST:
out to all other pins shorted:
acc. MIL-STD883D, method 3015.7 and
ESD assn. std. S5.1-1993; R=1.5kΩ; C=100pF
Input voltage (DC)
Current through input pin (DC)
Current through status pin (DC)
see internal circuit diagrams page 8
Vbb
Vbb
VLoad dump3)
IL
Tj
Ta
Tstg
Ptot
ZL
VESD
VIN
IIN
IST
Values Unit
43 V
24 V
60 V
self-limited A
150 °C
-30 ...+85
-40 ...+105
75 W
5.6 mH
1.0 kV
4.0
8.0
-10 ... +16 V
±2.0 mA
±5.0
Thermal Characteristics
Parameter and Conditions
Symbol
Thermal resistance
chip - case: RthJC
junction - ambient (free air): RthJA
device on pcb5):
Values
min typ max
--
-- 1.67
--
-- 75
-- 42
--
Unit
K/W
1) Supply voltages higher than Vbb(AZ) require an external current limit for the GND and status pins (a 150Ω
resistor for the GND connection is recommended).
2)
3)
RI = internal resistance of the load dump test pulse generator
VLoad dump is setup without the DUT connected to the generator per ISO 7637-1 and DIN 40839
4) EAS is the maximum inductive switch-off energy
5) Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70µm thick) copper area for Vbb
connection. PCB is vertical without blown air.
Infineon Technologies AG
Page 3
2006-Mar-16
Share Link: