10128787-001RLF Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

10128787-001RLF

M.2 connector

Unspecified 

NUMBER

GS-12-1195

TITLE

TYPE

PRODUCT SPECIFICATION

M.2 connector

PAGE

REVISION

5 of 7

C

AUTHORIZED BY

Kenny Tai

DATE

2014/11/19

CLASSIFICATION

UNRESTRICTED

C Environmental Requirement

ITEM

Test Item

Requirements

13

Resistance to Reflow

Soldering Heat

No physical damage shall occur.

（Lead-Free）

(See Note 2)

14 Thermal shock

See Note 1

15 Thermal Disturbance See Note 1

16 Thermal Cycling

See Note 1

17 Humidity

See Note 1

18 Temperature Life

See Note 1

Procedure

Pre Heat：150~180℃, 90±30sec.

Heat：230℃ Min., 30±10sec.

Peak Temp.：260+0/-5℃, 10sec.

Duration：3 cycles

Mated Connectors

-55+/-3℃ (30 min.), +85+/-2℃ (30 min.)

Perform this cycle, repeat 5 cycles

(EIA-364-32)

Mated connectors

Cycle the connector between -15℃+/-3℃

and 85℃+/-3℃. Ramps should be 1℃ min.

per minute, and dwell times should ensure

the contacts reach the temperature

extremes (5 minutes min.). Humidity is not

controlled. Perform 10 such cycles.

Cycle the connector between -15℃+/-3℃

and 85℃+/-3℃. Ramps should be 1℃ min.

per minute, and dwell times should ensure

the contacts reach the temperature

extremes (5 minutes min.). Humidity is not

controlled. Perform 500 such cycles.

Subject mated Connectors to 96 hours at

40℃ with 90~95% RH.

(EIA-364-31 Method II Test Condition A.)

Mated Connector 90℃, 288 hours,

(EIA-364-17 Method A.)

19 Salt Spray

No detrimental corrosion allowed

in contact area and base metal

exposed.

Subject mated connectors to 35+/-2 ℃ and

5+/-1% salt condition for 24hours. After

test, rinse the sample with water and

recondition the room temperature for 1

hour. (EIA-364-26B)

Note 1：Shall meet visual requirements, show no physical damage, and meet requirement of additional tests as

specified in the test sequence.

Note 2：Resistance to soldering process is indicated on notes of customer drawing. Select the appropriate test

type which drawing notes are matched with.

Copyright FCI.

Form E-3701 – Revision C

PDS: Rev :C

GS-01-029

STATUS:Released

Printed: Jan 16, 2015

Share Link: