DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

PCA9617ADPJ Ver la hoja de datos (PDF) - NXP Semiconductors.

Número de pieza
componentes Descripción
Fabricante
PCA9617ADPJ
NXP
NXP Semiconductors. NXP
PCA9617ADPJ Datasheet PDF : 23 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
NXP Semiconductors
PCA9617A
Level translating Fm+ I2C-bus repeater
Table 5. Static characteristics …continued
VCC(A) = 0.8 V to 5.5 V[1]; VCC(B) = 2.2 V to 5.5 V; GND = 0 V; Tamb = 40 C to +85 C; unless otherwise specified.
Typical values measured with VCC(A) = 0.95 V and VCC(B) = 2.5 V at 25 C, unless otherwise noted.
Symbol Parameter
Conditions
Min
Typ Max
ILI
input leakage current
1
-
+1
Ci
input capacitance
VI = VCC(B)
-
6
7
Unit
A
pF
[1] VCC(A) may be as high as 5.5 V for overvoltage tolerance but 0.4VCC(A) + 0.8 V VCC(B) for the channels to be enabled and functional
normally.
[2] For part to function, 0.4 VCC(A) must be equal or less than VCC(B) 0.8 V. The voltage on the A port can still be up to 5.5 V without
damage to the pins.
[3] Pull-up should result in IOL 150 A.
[4] Guaranteed by design and characterization.
[5] VIL for port A with envelope noise must be below 0.3VCC(A) for stable performance.
[6] When VCC(A) is less than 1 V, care is required to make certain that the system ground offset and noise are minimized such that there is
reasonable difference between the VIL present at the PCA9617A A-side input and the 0.25VCC(A) input threshold.
[7] Power supply decoupling capacitors need to be present for both VCC(A) and VCC(B) and the 0.1 F decoupling for VCC(B) needs to be
located near the VCC(B) pin.
0.70
port B VOL
(V)
0.65
0.60
VCC(B) = 2.2 V (Nom = 25 °C)
2.2 V (Hot = 85 °C)
3.0 V (Hot = 85 °C)
002aah461
0.4
Port A VOL
(V)
0.3
VCC(B) = 2.2 V (Nom = 25 °C)
2.2 V (Hot = 85 °C)
0.2
002aag896
0.55
0.1
0.50
0
10
20
30
port B IOL (mA)
Fig 10. Port B VOL versus IOL
0
0
10
20
30
Port A IOL (mA)
Fig 11. Port A VOL versus IOL
110
Port B
tPHL (ns)
100
002aag897
maximum
90
typical
minimum
80
70
50
100
150
200
CL at constant RC (pF)
RC = 67.5 ns, VCC(A) = 0.95 V, VCC(B) = 2.5 V, and Tamb = 25 C.
Fig 12. Nominal port B tPHL with load capacitance at constant RC
PCA9617A
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 March 2013
© NXP B.V. 2013. All rights reserved.
11 of 23

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]