MAX14535EEVKIT Ver la hoja de datos (PDF) - Maxim Integrated

Número de pieza

componentes Descripción

Fabricante

MAX14535EEVKIT

MAX14535E Evaluation Kit

Maxim Integrated 

MAX14535E Evaluation Kit

Switch Enable

Jumper JU2 configures the MAX14535E enable input

(EN). The EN signal can also be driven by an external

controller using the EN and nearby GND PCB pads. To

use an external controller, remove capacitor C6. See

Table 2 to set EN using jumper JU2.

Digital Control

Jumper JU3 configures the MAX14535E digital-control

bit (CB). The CB input sets the position of the switches

to either the NO_ or NC_ terminals. The CB signal can

also be driven by an external controller using the CB

and nearby GND PCB pads. To use an external con-

troller, remove capacitor C7. See Table 3 to set CB

using jumper JU3.

Table 2. Switch Enable Configuration (JU2)

SHUNT POSITION

1-2*

2-3

—

EN PIN CONNECTION

VCC

GND

EN PCB pad

*Default position.

SWITCH ENABLE

Switch enabled

Switch set to high impedance

Driven by external controller; remove capacitor C6

Table 3. Digital Control Configuration (JU3)

SHUNT POSITION

1-2

2-3*

—

CB PIN CONNECTION

VCC

GND

CB PCB pad

*Default position.

SWITCH POSITION

NO_

NC_

Driven by external controller; remove capacitor C7

_______________________________________________________________________________________ 3

Share Link: