AXK5SA6077YB Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
AXK5SA6077YB Datasheet PDF : 15 Pages
| |||
AXK(5(S)/6(S))
SPECIFICATIONS
1. Characteristics
Item
Electrical
characteristics
Rated current
Rated voltage
Breakdown voltage
Insulation resistance
Contact resistance
3mm, 3.5mm type
0.5A/terminal (Max. 10A)
Specifications
4mm, 4.5mm, 5mm,
5.5mm, 6mm, 6.5mm type
7mm, 8mm, 9mm type
0.5A/terminal (Max. 16A)
60V AC/DC
150V AC for 1 min.
Min. 1000MΩ
Max. 60mΩ
Max. 80mΩ
Mechanical
characteristics
Composite insertion
force
Composite removal
force
Contact holding force
Ambient temperature
Soldering heat
resistance
Max. 0.785N × no. of pins (initial)
Min. 0.0588N × no. of pins
Min. 0.98N/pin contacts
–55°C to +85°C
Max. peak temperature of 260°C
(on the surface of the PC board around the connector terminals)
300°C within 5 sec., 350°C within 3 sec.
Conditions
Detection current: 1mA
Using 500V DC megger
Based on the contact resistance
measurement method specified
by JIS C 5402.
Measuring the maximum force.
As the contact is axially pull out.
No freezing at low temperatures
Infrared reflow soldering
Soldering iron
Conformed to MIL-STD-202F,
method 107G
Thermal shock
resistance (header
and socket mated)
Environmental
characteristics
5 cycles, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
5 cycles,
insulation resistance
min. 100MΩ,
contact resistance
max. 80mΩ
Order
1
2
3
4
Temperature
(°C)
–55−03
85+30
–55−03
Time
(minutes)
30
Max. 5
30
Max. 5
Lifetime
characteristics
Unit weight
Humidity resistance
(header and socket
mated)
Saltwater spray
resistance (header
and socket mated)
H2S resistance
(header and socket
mated)
Insertion and removal
life
120 hours, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
24 hours, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
120 hours,
24 hours,
48 hours, contact resistance max. 60mΩ
48 hours,
50 times
P5K 3mm 30 pin contacts Socket: 0.17g Header: 0.09g
P5KS 4mm 30 pin contacts Socket: 0.18g Header: 0.16g
insulation resistance
min. 100MΩ,
contact resistance
max. 80mΩ
insulation resistance
min. 100MΩ,
contact resistance
max. 80mΩ
contact resistance
max. 80mΩ
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwarter concentration 5±1%
Bath temperature 40±2°C,
gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal
speed of max. 200 times/hours
2. Material and surface treatment
Part name
Mated height 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 9mm
Material
Surface treatment
Molded portion
Heat-resistant resin (UL94V-0)
—
Contact/post
Copper alloy
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
The section close to the soldering portion has a nickel barrier.
(The nickel base is exposed.)
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
ACCTB22E 201303-T
Share Link: 