Philips Semiconductors
I2C-bus controlled PAL/NTSC/SECAM TV
processors
Tentative Device Specification
TDA884X/5X-N2 series
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
VP
Tstg
Tamb
Tsol
Tj
Ves
PARAMETER
supply voltage
storage temperature
operating ambient temperature
soldering temperature
operating junction temperature
electrostatic handling
CONDITIONS
MIN.
−
−25
0
for 5 s
−
−
HBM; all pins; notes 1 and 2 −2000
MM; all pins; notes 1 and 3 −200
Notes
1. All pins are protected against ESD by means of internal clamping diodes.
2. Human Body Model (HBM): R = 1.5 kΩ; C = 100 pF.
3. Machine Model (MM): R = 0 Ω; C = 200 pF.
MAX.
9.0
+150
70
260
150
+2 000
+200
UNIT
V
°C
°C
°C
°C
V
V
THERMAL CHARACTERISTICS (THERMAL RESISTANCE FROM JUNCTION TO AMBIENT IN FREE AIR)
SYMBOL
Rth j-a
SDIP 56
QFP 64
ENVELOPE
VALUE
40
50
UNIT
K/W
K/W
QUALITY SPECIFICATION
In accordance with “SNW-FQ-611E”. The number of the quality specification can be found in the “Quality Reference
Handbook”. The handbook can be ordered using the code 9398 510 63011.
Latch-up
At an ambient temperature of 70 °C nearly all pins meet the following specification:
• Itrigger ≥ 100 mA or ≥1.5VDD(max)
• Itrigger ≤ −100 mA or ≤−0.5VDD(max).
Some pins have a slightly lower trigger current. The pin numbers and and the allowable trigger current are given below.
Pin 50: Itrigger ≥ 70 mA
Pin 51: Itrigger ≥ 60 mA
Pin 52: Itrigger ≥ 60 mA
December 16, 1997
27