RH56D-PCI Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

RH56D-PCI

Host-Controlled V.90/K56flex™ Modem device Family for Desktop Applications

Unspecified 

RH56D-PCI Modem Designer’s Guide

between calls, and maximum numbers of retries before the number is permanently forbidden ("blacklisted"). Up to 20 such

numbers may be tabulated. The blacklist parameters are programmable. The current blacklisted and delayed numbers can be

queried via AT*B and AT*D commands, respectively.

2.9 DIAGNOSTICS

2.9.1 Commanded Tests

Diagnostics are performed in response to the &T1 command per V.54.

Analog Loopback (&T1 Command). Data from the local DTE is sent to the modem, which loops the data back to the local

DTE.

Last Call Status Report (#UD). This command reports the status of the last call.

2.10 LOW POWER SLEEP MODE

When not connected in data, fax, or speakerphone mode, the MDP is placed in a low power state.

2-4

Conexant

1213

Conexant Proprietary Information

Share Link: