CL1F1200 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

CL1F1200

Clipper Industrial Plastic Connectors

Unspecified 

Clipper Industrial Plastic Connectors

Wiring Instruction

Stripping Instructions

Use the upmost care with stripping operation :

• Use stripping pliers appropriate for the cable gauge and which are in perfect condition.

• In order to obtain a correct crimping and to maintain all of the connector sealing characteristics, the wires must have the dimensions described below.

Jacketed Cable Stripping Length

l

Make a 90° cut at the cable end.

carefully make an incision in order to remove the cable protection on a

length LD as described.

Shell

size

layouts

LD mm

(inch)

1

2

3

4

Indifferent

60

65

65

(2.36’) (2.56’) (2.56’)

26

80

(3.15")

40

100

(3.94")

Caution : This operation should be realized without deterioration

of wires insulation.

Then, follow the normal stripping instructions :

- single wire with machined crimping contacts,

- single wire with stamped and formed crimping contacts

Wire Stripping Length

• With machined crimping contacts

Contact

size

layouts

#20

I = Wire stripping lenght

6 mm (.236")

Ø over insulation > 2 mm Ö l = 5 (> .08" Ö l = .20")

Ø over insulation > 2 mm Ö l = 7 (> .08" Ö l = .27")

• With stamped and formed crimping contacts

Contact

diameter

#16

#20

I = Wire stripping lenght

4 mm (.157")

4 mm (.157")

21

Share Link: