Technical Note of LA76931
V TRANCE
1 Enable data transmission between vertical retrace period
0 = random transmission
1 = transmission between vertical retrace period
V Reset Timing
1 Select Vertical Reset Timing
Select Vertical output start timing.
0 = Normal
1 =0.25H shifted
Audio Mute
1 Disable audio outputs
Mute the audio output.
0 = Mute OFF
1 = Mute ON
Video Mute
1 Disable video outputs
Mute the RGB output.(The blanking output level of RGB is about 1.6Vdc)
0 = Mute OFF
1 = Mute ON
H PHASE
Adjust the center of H.
5 Align sync to flyback phase
Sync Kill
1 Force free-run mode
Whatever there is a synchronization signal or not, the frequency of horizontal oscillator is in free-run situation.
Set this function in active if “no signal” is detected by CPU, then the rolling of OSD can almost be reduced.
0 = TV operating mode
1 = Sync Kill mode
Vertical Size
Adjust the size of V.
7 Align vertical amplitude
V-sync Separation Up
1 Select vertical sync. separation sensitivity
Improved the sensitivity of the vertical separation circuit.
0 = Normal mode
1 = Sensitivity up mode
4/46