25X10BLIG Ver la hoja de datos (PDF) - Winbond

Número de pieza

componentes Descripción

Fabricante

25X10BLIG

1M-BIT, 2M-BIT AND 4M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL I/O SPI

Winbond 

W25X10BL/20BL/40BL

9.1.6 Status Register Protect (SRP)

The Status Register Protect (SRP) bit is a non-volatile read/write bit in status register (S7) that can be

used in conjunction with the Write Protect (/WP) pin to disable writes to status register. When the SRP

bit is set to a 0 state (factory default) the /WP pin has no control over status register. When the SRP

pin is set to a 1, the Write Status Register instruction is locked out while the /WP pin is low. When the

/WP pin is high the Write Status Register instruction is allowed.

Figure 3. Status Register Bit Locations

- 12 -

Share Link: