25X10AVIG Ver la hoja de datos (PDF) - Winbond

Número de pieza

componentes Descripción

Fabricante

25X10AVIG

1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI

Winbond 

W25X10A, W25X20A, W25X40A, W25X80A

10.2.8 Fast Read (0Bh)

The Fast Read instruction is similar to the Read Data instruction except that it can operate at the

highest possible frequency of FR (see AC Electrical Characteristics). This is accomplished by adding

eight “dummy” clocks after the 24-bit address as shown in figure 9. The dummy clocks allow the

devices internal circuits additional time for setting up the initial address. During the dummy clocks the

data value on the DIO pin is a “don’t care”.

Figure 9. Fast Read Instruction Sequence Diagram

- 20 -

Share Link: