UPC4744 Ver la hoja de datos (PDF) - NEC => Renesas Technology
Número de pieza
componentes Descripción
Fabricante
UPC4744
NEC => Renesas Technology
UPC4744 Datasheet PDF : 12 Pages
| |||
µPC4744
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C)
Parameter
Voltage between V+ and V– Note 1
Differential Input Voltage
Input VoltageNote 2
Output VoltageNote 3
Power Dissipation
C PackageNote 4
G2 PackageNote 5
Output Short Circuit DurationNote 6
Operating Ambient Temperature
Storage Temperature
Symbol
V+ –V–
VID
VI
VO
PT
TA
Tstg
Ratings
Unit
–0.3 to +36
V
±36
V
V– –0.3 to V– +36
V
V– –0.3 to V+ +0.3
V
570
mW
550
mW
Indefinite
sec
–20 to +80
°C
–55 to + 125
°C
Notes 1. Reverse connection of supply voltage can cause destruction.
2. The input voltage should be allowed to input without damage or destruction independent of the
magnitude of V+. Either input signal should not be allowed to go negative by more than 0.3 V. The normal
operation will establish when the both inputs are within the Common Mode Input Voltage Range of
electrical characteristics.
3. This specification is the voltage which should be allowed to supply to the output terminal from external
without damage or destructive. Even during the transition period of supply voltage, power on/off etc.,
this specification should be kept. The output voltage of normal operation will be the Output Voltage Swing
of electrical characteristics.
4. Thermal derating factor is –7.6 mW/°C when operating ambient temperature is higher than 50 °C.
5. Thermal derating factor is –5.5 mW/°C when operating ambient temperature is higher than 25 °C.
6. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note
4 and Note 5.
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage (Split)
Symbol
MIN.
TYP.
MAX.
Unit
V±
±1.5
±16
V
Supply Voltage (V– = GND)
V+
+3
+32
V
Output Current
IO
±10
mA
Capacitive Load (AV = +1, Rf = 0 Ω)
CL
1000
pF
2
Share Link: