Electrical characteristics
TS4962
Table 5.
Electrical characteristics at VCC = +5V,
with GND = 0V, Vicm = 2.5V, and Tamb = 25°C (unless otherwise specified)
(continued)
Symbol
Parameter
Min. Typ. Max. Unit
VN Output voltage noise f = 20Hz to 20kHz, G = 6dB
Unweighted RL = 4Ω
85
A-weighted RL = 4Ω
60
Unweighted RL = 8Ω
86
A-weighted RL = 8Ω
62
Unweighted RL = 4Ω + 15µH
A-weighted RL = 4Ω + 15µH
Unweighted RL = 4Ω + 30µH
A-weighted RL = 4Ω + 30µH
83
60
88
μVRMS
64
Unweighted RL = 8Ω + 30µH
78
A-weighted RL = 8Ω + 30µH
57
Unweighted RL = 4Ω + Filter
87
A-weighted RL = 4Ω + Filter
65
Unweighted RL = 4Ω + Filter
82
A-weighted RL = 4Ω + Filter
59
1. Standby mode is active when VSTBY is tied to GND.
2. Dynamic measurements - 20*log(rms(Vout)/rms(Vripple)). Vripple is the superimposed sinusoidal signal to
VCC @ f = 217Hz.
10/46