TLE4254
Electrical Characteristics
5.4
Status Output (version GS / EJ S only)
The status output ST indicates an overvoltage or undervoltage situation at the regulator’s output Q. Therefore, the
output voltage VQ is compared to the reference voltage VADJ/EN. Variations of the output voltage are indicated by
a low signal at the status output ST. Transients shorter than the status reaction time tST,r will not trigger the status
output.
The status output ST is an open collector output, requiring a pull-up resisitor to a positive voltage rail.
Table 4 Electrical Characteristics Status Output ST (Version GS / EJ S only)
VI = 13.5 V; VADJ/EN ≥ 2.0 V; -40 °C ≤ Tj ≤ 150 °C; CQ = 1 µF
all voltages with respect to ground (unless otherwise specified).
Pos. Parameter
Symbol
Limit Values
Unit Test Condition
Min. Typ. Max.
5.4.21 Status switching threshold, VQ,UV
undervoltage
V V V mV ADJ/EN
ADJ/EN
ADJ/EN
- 120 - 70 - 50
VQ decreasing
5.4.22 Status switching threshold, VQ,OV
overvoltage
V V V mV ADJ/EN
ADJ/EN
ADJ/EN
+ 50 + 70 + 120
VQ increasing
5.4.23 Status reaction time
5.4.24 Status output
low voltage
5.4.25 Status output
sink current limitation
5.4.26 Status output
leakage current
tST,r
VST,low
IST,max
IST,leak
10 15 30 µs –
–
–
0.4 V
IST = 1 mA;
VI ≥ 4 V
1
–
–
mA IST = 1 mA;
VST = 0.8 V
–
0
2
µA VQ = VADJ/EN
VST = 5 V
Data Sheet
14
Rev. 1.2, 2009-11-18